Free Shipping

on orders over $499.This offer is valid on all our store items.
Cart (empty)
Your cart is empty
134
Linn Gear Model: 1030C12 Additional Description Type C Steel Sprockets for No. 1030 Mill Chain3.075\" Chain Pitch - 1 1/4\" Barrel Diameter - 1 1/4\" Sprocket Face WidthStock bores are nominal and must be re-bored even though bore desired is same size as listed stock bore.Listed maximum bore is with set screw at angle to keyway.Stock sprockets above may also be used with the following chains or others having the same pitch, barrel diameter and width, however all may not clear standard hub on 6 and 7 tooth sprockets due to variations in side bars.Chain Belt - Champion No. 3, 1030DW, 1033, R1033, R1035, 1037, 1539 Jeffrey - 3DD, SS39, IS1030, IS1031, IS1032, IS1037, IS3075 Link Belt - AP13 Redhead, SS39, SS39+, SS40, SS40 Hyper, SS40+, LXS1031, LXS1032, LXS1032M, SS1033, LXS3075M Moline - MXS40, MXS1031, MXS3075 Union - 119J, 119R, 119RX, US1031, US1032, 1190R, 1190R3, 1190RX, 1190SX, 1190SXX Webster - SS54+, S554Sprockets of other face widths or tooth numbers as well as those for practically any other chain are readily available and all can be furnished with hardened teeth. Please inquire for information and delivery.Split Mill Chain Sprocket info (PDF) Pitch Diameter Maximum Bore Stock Bore Hub Diameter Length Through Bore Sprocket Weight 11.881 3.750\" 1.687\" 5.50\" 4.500\" 60.00lbs Documents Split Mill Chain Sprocket info 1030C12 FLAME CUT H1
$382.19382.19
In Stock

Linn Gear Model: 1030C12 Additional Description Type C Steel Sprockets for No. 1030 Mill Chain3.075" Chain Pitch - 1 ...


 
Stock Status: Stock
Manufacturer Name: Linn Gear
Manufacturer Number: Linn Gear 1030C12
Product ID: 134
Default Weight: 60lbs
Minimum Order: 1
Sell in Unit of: 1
Distributor sku: Linn Gear Distributor part 1030C12
Wholsesaler sku: Linn Gear Wholesaler part 1030C12
Retailer reference: Linn Gear Retailer model 1030C12
Supplier sku: Linn Gear Supplier sku 1030C12
 
Linn Gear Model: 1030C12

Additional Description


Type C Steel Sprockets for No. 1030 Mill Chain3.075" Chain Pitch - 1 1/4" Barrel Diameter - 1 1/4" Sprocket Face WidthStock bores are nominal and must be re-bored even though bore desired is same size as listed stock bore.Listed maximum bore is with set screw at angle to keyway.Stock sprockets above may also be used with the following chains or others having the same pitch, barrel diameter and width, however all may not clear standard hub on 6 and 7 tooth sprockets due to variations in side bars.Chain Belt - Champion No. 3, 1030DW, 1033, R1033, R1035, 1037, 1539 Jeffrey - 3DD, SS39, IS1030, IS1031, IS1032, IS1037, IS3075 Link Belt - AP13 Redhead, SS39, SS39+, SS40, SS40 Hyper, SS40+, LXS1031, LXS1032, LXS1032M, SS1033, LXS3075M Moline - MXS40, MXS1031, MXS3075 Union - 119J, 119R, 119RX, US1031, US1032, 1190R, 1190R3, 1190RX, 1190SX, 1190SXX Webster - SS54+, S554Sprockets of other face widths or tooth numbers as well as those for practically any other chain are readily available and all can be furnished with hardened teeth. Please inquire for information and delivery.Split Mill Chain Sprocket info (PDF) Pitch Diameter Maximum Bore Stock Bore Hub Diameter Length Through Bore Sprocket Weight 11.881 3.750" 1.687" 5.50" 4.500" 60.00lbs






Documents






Split Mill Chain Sprocket info











1030C12 FLAME CUT H1